Comware CLI Commands in Provision Software 2013/06

display lldp status
Related ProVisionComware
No equivalent ProVision software commanddisplay lldp status
Displays information about Link Layer Discovery Protocol (LLDP) and Link Level Discovery
Protocol-Media Endpoint Discovery (LLDP-MED) configuration and capabilities on the switch. LLDP
and LLDP-MED are used to learn about and to distribute device information on network links. This
command shows information on global level as well as the interface level.
HP Switch# display lldp status
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 33 days,19 hours,39
minutes,37 seconds
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 2s
Transmit delay : 2s
Trap interval : 5s
Fast start times : 3
Port 1 [GigabitEthernet1/0/1]:
Port status of LLDP : Enable
Admin status : Tx_Rx
Trap flag : No
Polling interval : 0s
Number of neighbors: : 0
Number of MED neighbors : 0
Number of CDP neighbors : 0
Number of sent optional TLV : 0
Number of received unknown TLV : 0
148 Display Commands