Comware CLI Commands in Provision Software 2013/06

display lldp tlv-config interface interface-type interface-number
Related ProVisionComware
No equivalent ProVision software commanddisplay lldp tlv-config interface interface-type
interface-number
LLDP information is sent by devices from each of their interfaces at a fixed interval in the form of
an Ethernet frame. Each frame contains one Link Layer Discovery Protocol Data Unit (LLDPDU).
Each LLDPDU is a sequence of typelength- value (TLV) structures. Each LLDP frame starts with the
following mandatory TLVs: Chassis ID, Port ID, and Time-to-Live. The mandatory TLVs are followed
by any number of optional TLVs. All Optional TLVs can be configured per port basis and can be
displayed with the help of this command for a particular interface.
HP Switch# display lldp tlv-config
LLDP tlv-config of port 98[GigabitEthernet2/0/2]:
NAME STATUS DEFAULT
Basic optional TLV:
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV:
Port VLAN ID TLV YES YES
Port And Protocol VLAN ID TLV YES YES
VLAN Name TLV YES YES
IEEE 802.3 extend TLV:
MAC-Physic TLV YES YES
Power via MDI TLV YES YES
Link Aggregation TLV YES YES
Maximum Frame Size TLV YES YES
LLDP-MED extend TLV:
Capabilities TLV YES YES
Network Policy TLV YES YES
Location Identification TLV NO NO
Extended Power via MDI TLV YES YES
Inventory TLV YES YES
150 Display Commands