Comware CLI Commands in Provision Software 2013/06

display memory
Related ProVisionComware
show system informationdisplay memory
Displays the current memory usage on the switch.
HP Switch(config)# display memory
System Total Memory(bytes): 128090112
Total Used Memory(bytes): 47385504
Used Rate: 36%
Field Descriptions
System Total Memory (bytes): Total system memory in the switch.
Total Used Memory (bytes): Total system memory in use.
Used Rate: Percentage of system memory in use.
Operating Notes
To display memory usage in ProVision Software, use the following command:
HP Switch# show system information
This command lists the total memory and free memory available in the switch, along with other
system-related information.
For more on system information, refer to the “Interface Access and System Information” chapter in
the latest Basic Operation Guide for your switch.
Minimum Software Version: 15.08.
Example of Related ProVision Software Command Output.
HP Switch# show system information
Status and Counters - General System Information
System Name : HP Switch
System Contact :
System Location :
MAC Age Time (sec) : 300
Time Zone : -480
Daylight Time Rule : Continental-US-and-Canada
Software revision : K.15.08.0003 Base MAC Addr : 001871-c42f00
ROM Version : K.15.27 Serial Number : SG641SU00L
Allow V1 Modules : Yes Opacity Shields : Not Installed
Up Time : 3 hours Memory - Total : 128,040,960
CPU Util (%) : 0 Free : 80,694,816
IP Mgmt - Pkts Rx : 126,890 Packet - Total : 6750
Pkts Tx : 5123 Buffers Free : 5086
Lowest : 5051
Missed : 0
display memory 163