Comware CLI Commands in Provision Software 2013/06

display mld group x:x::x:x
Related ProVisionComware
show ipv6 mld vlan <vid>display mld group x:x::x:x
Displays information of all MLD groups.
HP Switch# display mld group ff02::2
Interface group report information
Interface:Vlan30
Last Reporter : fe80::3e4a:92ff:feab:9300
Uptime : 5 ...
Expires : 00:02:38
Field Descriptions
Group: Multicast group address
Last reporter: Address of the last host that reported its membership for this multicast group
Uptime: Length of time since the multicast group was reported
Expires: Remaining time of the multicast group
Example of Related ProVision Software Command Output.
There is no equivalent ProVision command.
HP Switch# show ipv6 mld vlan 30
MLD Service Protocol Info
VLAN ID : 30 NAME : VLAN30
MLD Version : 2
MLD Interface State : Non-Querier
Querier Address : fe80::3e4a:92ff:feab:9300
Port : A2
Version : 2
Uptime : 5d 18h 38m
Expires : 3m 48s
Ports with multicast routers : A2
Active Group Addresses Tracking Vers Mode Uptime Expires
----------------------- ------- ---- ---- -------- -----
ff02::2 Standard 1 EXC 5d 18... 2m 30s
ff02::16 Standard 1 EXC 5d 18... 2m 33s
ff02::1:ff00:0 Standard 1 EXC 5d 18... 2m 28s
ff02::1:ff00:3 Standard 1 EXC 5d 18... 2m 27s
ff02::1:ffab:9300 Standard 1 EXC 5d 18... 2m 24s
172 Display Commands