Comware CLI Commands in Provision Software 2013/06

display mld interface
Related ProVisionComware
show ipv6 mld vlan <vid>display mld interface
Displays MLD configuration and operation information on the specified interface or all MLD-enabled
interfaces.
HP Switch# display mld interface
Interface information
Vlan-Interface30(2075:1:1:30::1):
MLD is enabled
Current MLD version is 2
Value of query interval for MLD(in seconds) : 125
Value of other querier present interval for MLD(in seconds) : 255
Value of maximum query response time for MLD(in seconds) : 10
Querier for MLD : fe80::3e4a:92ff:feab:9300
Total 5 MLD Groups reported
Field Descriptions
Vlan-interface30 (2075:1:1:30::1): Interface and IPv6 link-local address
Current MLD version: MLD version running on the interface
Value of query interval for MLD (in seconds): MLD query interval, in seconds
Value of other querier present interval for MLD (in seconds): MLD other querier present interval, in
seconds
Value of maximum query response time for MLD (in seconds): Maximum response delay for general
query messages (in seconds)
Querier for MLD: IPv6 link-local address of the MLD querier
Total 5 MLD Groups reported: Total number of MLD groups the interface has dynamically joined
Example of Related ProVision Software Command Output.
There is no direct equivalent ProVision command. Please see "show ipv6 mld vlan <vid> " on page
2-109.
174 Display Commands