Comware CLI Commands in Provision Software 2013/06
display mld interface vlan-interface <vid> verbose
Related ProVisionComware
show ipv6 mld vlan <vid>display mld interface vlan-interface <vid> verbose
Displays MLD configuration and operation information on the specified interface or all MLD-enabled
interfaces.
HP Switch# display mld interface vlan-interface 30 verbose
Vlan-Interface30(2075:1:1:30::1):
MLD is enabled
Current MLD version is 2
Value of query interval for MLD(in seconds) : 125
Value of other querier present interval for MLD(in seconds)
: 255
Value of maximum query response time for MLD(in seconds) : 10
Querier for MLD : fe80::3e4a:92ff:feab:9300
Value of last listener query interval(in seconds) : 1
Value of startup query interval(in seconds) : 31
Value of startup query count : 2
General query timer expiry (hours:minutes:seconds) : 00:02:38
MLD activity : 19866 joins, 0 leaves
Multicast ipv6 routing on this interface : n/a
Robustness : 2
Require-router-alert : enabled
Fast-leave : enabled
Ssm-mapping : n/a
Startup-query-timer-expiry : off
Other-querier-present-timer-expiry : on
Proxying interface : n/a
Total 5 MLD Groups reported
Field Descriptions
Vlan-interface100(FE80::200:AFF:FE01:101): Interface and IPv6 link-local address
Current MLD version: MLD version running on the interface
Value of query interval for MLD (in seconds): MLD query interval, in seconds
Value of other querier present interval for MLD (in seconds): MLD other querier present interval, in
seconds
Value of maximum query response time for MLD (in seconds): Maximum response delay for general
query messages (in seconds)
Value of last listener query interval (in seconds): MLD last listener query interval, in seconds
Value of startup query interval(in seconds): MLD startup query interval, in seconds
Value of startup query count: Value of startup query count:
General query timer expiry: Remaining time of the MLD general query timer, where "off" means
that the timer never times out
Querier for MLD: IPv6 link-local address of the MLD querier
MLD activity: MLD activity statistics (number of join and done messages)
Robustness: MLD querier’s robustness variable
Require-router-alert: Dropping MLD messages without Router-Alert (enabled/ disabled)
Fast-leave: MLD fast leave processing status (enabled/disabled)
Ssm-mapping: MLD SSM mapping status (enabled/disabled)
178 Display Commands