Comware CLI Commands in Provision Software 2013/06

display ospf lsdb
Related ProVisionComware
show ip ospf link-statedisplay ospf lsdb
show ip ospf external-link-state
NOTE: This command is not supported on the HP 2920 Series switches.
Displays OSPF link state database information.
HP Switch# display ospf lsdb
OSPF Process 1 with Router ID 7.7.7.7
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 11.0.9.2 11.0.9.2 930 n/a 80000005 n/a
Router 11.0.9.1 11.0.9.1 456 n/a 80000004 n/a
Network 11.0.9.2 11.0.9.2 930 n/a 80000002 n/a
Sum-Net 1.2.4.0 11.0.9.1 16 n/a 80000001 n/a
Area: 0.0.0.1
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 11.0.9.1 11.0.9.1 9 n/a 80000003 n/a
Router 100.0.9.4 100.0.9.4 10 n/a 80000004 n/a
Network 1.2.4.6 100.0.9.4 5 n/a 80000002 n/a
Sum-Net 11.0.9.0 11.0.9.1 16 n/a 80000001 n/a
AS External Database
Type LinkState ID AdvRouter Age Len Sequence Metric
External 192.168.1.0 3.3.3.3 406 n/a 80000006 n/a
[bot-ospf-1-area-0.0.0.1]
Field Descriptions
Area: LSDB information of the area
Type: LSA type
LinkState ID: Linkstate ID
AdvRouter: The router that advertised the LSA
Age: Age of the LSA
Len: Length of the LSA
Sequence: Sequence number of the LSA
Metric: Cost of the LSA
Operating Notes
For more on switch OSPF operation, refer to the "IP Routing" chapter in the latest Multicast and
Routing Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch# show ip ospf link-state
OSPF Link State Database for Area 0.0.0.0
Advertising
LSA Type Link State ID Router ID Age Sequence # Checksum
display ospf lsdb 193