Comware CLI Commands in Provision Software 2013/06

display ospf peer
Related ProVisionComware
show ip ospf neighbordisplay ospf peer
NOTE: This command is not supported on the HP 2920 Series switches.
Displays information about OSPF neighbors.
HP Switch# display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Brief Information
Area: 0.0.0.0
Router ID Address Pri Dead-Time Interface State
1.1.1.2 1.1.1.2 1 40 Vlan11 Full/DR
Field Descriptions
Area: Neighbor area.
Router ID: Neighbor router ID
Address: Neighbor interface address.
Pri: Neighboring router priority.
Dead-Time: Dead interval remained.
Interface: Interface connected to the neighbor.
State: Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange, DR/BDR state, Loading or
Full.
Operating Notes
For more on switch OSPF operation, refer to the "IP Routing" chapter in the latest Multicast and
Routing Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch(config)# show ip ospf neighbor
OSPF Neighbor Information
Rxmt Helper
Router ID Pri IP Address NbIfState State QLen Events Status
--------------- --- -------------- --------- --------- ----- ------ ------
10.0.8.34 1 10.3.18.34 DR FULL 0 6 none
10.3.53.38 1 10.3.53.38 DR FULL 0 6 none
display ospf peer Field Mappings.
ProVision SoftwareComware
n/aArea
Router IDRouter ID
IP AddressAddress
PriPri
display ospf peer 195