Comware CLI Commands in Provision Software 2013/06

display ospfv3 area area-id peer interface interface-type interface number
Related ProVisionComware
No equivalent ProVision software commanddisplay ospfv3 area area-id peer interface interface-type
interface number
NOTE: This command is not supported on the HP 2920 Series switches.
Displays OSPFv3 neighbor information.
HP Switch# display ospfv3 area 0 peer Vlan-interface 1
OSPFv3 (Process 1)
OSPFv3 Area (0.0.0.0)
Neighbor ID Pri State Dead Time Interface Instance ID
1.1.1.1 1 Full 00:00:35 Vlan1 0
Field Descriptions
Neighbor ID: Router ID of a neighbor
Pri: Priority of neighbor router
State: Neighbor state
Dead Time: Dead time remained
Interface: Interface connected to the neighbor
Instance ID: Instance ID:
Operating Notes
For more on switch OSPFv3 operation, refer to the "OSPFv3 Routing" chapter in the latest IPv6
Configuration Guide for your switch.
display ospfv3 area area-id peer interface interface-type interface number 201