Comware CLI Commands in Provision Software 2013/06

Time Interval Configured: Time interval in seconds configured on the interface:
• Hello—Hello interval.
• Dead—Dead interval.
• Wait—After this timer expires, the interface quits from the waiting state.
• Retransmit—LSA retransmission interval.
Hello due in: Hello packet will be sent in the indicated number of seconds.
Neighbor Count: Number of neighbors on the interface.
Adjacent Neighbor Count: Number of adjacencies on the interface.
Operating Notes
To enable OSPF operation in ProVision software, enter the following commands in the global
configuration context:
ipv6 unicast-routing
router ospf3 enable
For more on configuring OSPFv3, including additional OSPFv3 configuration commands, see the
"OSPFv3 Routing" chapter in the latest IPv6 Configuration Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch(config)# show ipv6 ospf3 interface 75 detail
OSPFv3 configuration and statistics for VLAN 75
Interface : vlan-75 Status : Enabled
Area ID : 0.0.0.3 State : WAIT
Priority : 1 Cost : 1
Type : BCAST Passive : Yes
Hello Interval : 10 Dead Interval : 40
Transit Delay : 1 Retransmit Interval : 5
Events : 0 Designated Router : 15.1.1.2
Neighbors : 1 Backup Designated Router : 15.1.4.4
OSPF Interface Field Mappings.
ProVision SoftwareComware
InterfaceInterface ID
Statusn/a
n/aIPv6 Prefixes
n/aOSPF Process
Area IDArea
n/aInstance ID
n/aRouter ID
TypeNetwork Type
CostCost
Transit DelayTransmit Delay
StateState
PriorityPriority
Designated RouterDesignated Router
206 Display Commands