Comware CLI Commands in Provision Software 2013/06

display ospfv3 peer
Related ProVisionComware
show ipv6 ospf3 neighbordisplay ospfv3 peer
NOTE: This command is not supported on the HP 2920 Series switches.
Displays OSPFv3 neighbor information.
HP Switch(vlan-2)# display ospfv3 peer
OSPFv3 Area ID 0.0.0.1 (Process 1)
Neighbor ID Pri State Dead Time Interface Instance ID
--------------------------------------------------------------------------
120.85.228.88 1 FULL 00:00:33 Vlan2 0
Field Descriptions
Neighbor ID: Router ID of a neighbor.
Pri: Priority of neighbor router for DR/BDR election.
State: Neighbor state.
Dead time: Dead time remaining
Interface: Interface connected to the neighbor.
Instance ID: Instance ID
Operating Notes
For more on switch OSPFv3 operation, refer to the "OSPFv3 Routing" chapter in the latest IPv6
Configuration Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch(ospf3)# show ipv6 ospf3 neighbor
OSPFv3 Neighbor Information
Interface Router ID Pri State Rxmt QLen Events
--------- --------------- ----- ---------- ---------- ----------
Vlan-55 15.1.0.1 1 Full 0 0
Vlan-75 15.1.1.2 1 Full 0 0
tunnel-3 4.3.2.1 1 Full 0 0
display ospfv3 peer Field Mappings.
ProVision SoftwareComware
Router IDNeighbor ID
InterfaceInterface
Router IDn/a
PriPri
StateState
n/aDead time
n/aInstance ID
display ospfv3 peer 211