Comware CLI Commands in Provision Software 2013/06

display ospfv3 statistic
Related ProVisionComware
show ipv6 ospf3 statisticsdisplay ospfv3 statistic
NOTE: This command is not supported on the HP 2920 Series switches.
Displays outbound/inbound OSPFv3 packet statistics on associated interface( s).
HP Switch(vlan-2)# display ospfv3 statistics
OSPFv3 Statistics
Interface 2 Instance 0
Type Input Output
Hello 6 10
DB Description 2 5
Ls Req 1 1
Ls Upd 2 3
Ls Ack 2 2
Discarded 32 1
Field Descriptions
Interface: Interface name.
Instance: Instance number.
Type: Type of packet.
Input: Number of packets received by the interface.
Output: Number of packets sent by the interface.
Hello: Hello packet.
DB Description: Database description packet.
Ls Req: Link state request packet
Ls Upd: Link state update packet
Ls Ack: Link state acknowledgement packet
Discarded: Number of discarded packets.
Operating Notes
For more on switch OSPFv3 operation, refer to the "OSPFv3 Routing" chapter in the latest IPv6
Configuration Guide for your switch.
Example of Related ProVision Software Command Output.
Per-VLAN OSPF Statistics
ContentField
OSPF statistics displayed for the specified VLAN numberOSPF statistics for VLAN
<vlan-id>
IP address of a subnet on the VLANOSPF Interface Status for
<ip-address>
Number of OSPF hello packets sent/received on each subnet interfaceTx/Rx Hello Packet Count
Number of link-state database description packets sent/ received on each subnet
interface
Tx/Rx DD Packet Count
218 Display Commands