Comware CLI Commands in Provision Software 2013/06

display pim bsr-info
Related ProVisionComware
show ip pim bsrdisplay pim bsr-info
NOTE: This command is not supported on the HP 2920 Series switches.
Displays the BSR information in the PIM domain and the locally configured C-RP information in
effect.
HP Switch# display pim bsr-info
Elected BSR Address : 10.10.10.11
Priority : 0
Hash mask length : 30
State: n/a
Scope: n/a
Uptime : 00:08:00
Next BSR message scheduled at : 01:20:00
Candidate BSR Address : 10.10.10.10
Priority : 0
Hash mask length : 30
State: n/a
Scope: n/a
Candidate RP: 10.10.10.10(Vlan-interface10)
Priority : 192
HoldTime : 192
Advertisement Interval : 192
Next advertisement scheduled at: n/a
Candidate RP: 10.10.10.10(Vlan-interface20)
Priority : 192
HoldTime : 192
Advertisement Interval : 192
Next advertisement scheduled at: n/a
Candidate RP: 10.10.10.10(Vlan-interface30)
Priority : 192
HoldTime : 192
Advertisement Interval : 192
Next advertisement scheduled at: n/a
Field Descriptions
VPN-Instance: public net: Public network.
Elected BSR Address: Address of the elected BSR.
Candidate BSR Address: Address of the candidate BSR.
Priority: BSR priority.
Hash mask length: Hash mask length
State: BSR state.
Scope: Scope of the BSR.
Uptime: Length of time for which this BSR has been up, in hh:mm:ss.
Next BSR message scheduled at: Length of time in which the BSR will expire, in hh:mm:ss.
Candidate RP: Address of the C-RP.
Priority: Priority of the C-RP.
HoldTime: Timeout time of the C-RP.
Advertisement Interval: Interval at which the C-RP sends advertisement messages.
222 Display Commands