Comware CLI Commands in Provision Software 2013/06

display pim interface
Related ProVisionComware
show ip pim interfacedisplay pim interface <interface>
NOTE: This command is not supported on the HP 2920 Series switches.
Displays the PIM information on the specified interface or all interfaces.
HP Switch# display pim interface
VPN-Instance: n/a
Interface NbrCnt HelloInt DR-Pri DR-Address
Vlan10 n/a 30 1 10.10.10.11
Vlan20 n/a 30 1 20.20.20.20
Vlan30 n/a 30 1 30.30.30.30
Field Descriptions
VPN-Instance: public net: Public network.
Interface: Interface name.
NbrCnt: Number of PIM neighbors.
HelloInt: Hello interval.
DR-Pri: Priority for DR election.
DR-Address: DR IP address, where "local" indicates a local address
Operating Notes
For more information on PIM, see the "PIM-SM (Sparse Mode)" or the "PIMDM (Dense Mode)
chapters in the latest Multicast and Routing Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch(config)# show ip pim interface
PIM Interfaces
VLAN IP Address Mode
---- --------------- ------------
1 10.1.10.1 sparse
2 10.2.10.1 sparse
display pim interface Field Mappings.
ProVision SoftwareComware
n/aVPN-Instance public net
VLANInterface
n/aNbrCnt
n/aHelloInt
n/aDR-Pri
IP AddressDR-Address
Moden/a
226 Display Commands