Comware CLI Commands in Provision Software 2013/06

display pim neighbor
Related ProVisionComware
show ip pim neighbordisplay pim neighbor
NOTE: This command is not supported on the HP 2920 Series switches.
Displays information about PIM neighbors.
HP Switch# display pim neighbor
VPN-Instance: n/a
Total Number of Neighbors = n/a
Neighbor Interface Uptime Expires Dr-Priority Mode
10.1.1.2 Vlan100 02:50:49 00:01:31 n/a n/a
20.1.1.2 Vlan101 02:49:39 00:01:42 n/a n/a
Field Descriptions
VPN-Instance: public net: Public network
Total Number of Neighbors: Total number of PIM neighbors
Neighbor: IP address of the PIM neighbor
Interface: Interface connecting the PIM neighbor
Uptime: Length of time for which the PIM neighbor has been up, in hh:mm:ss
Expires/Expiry time: Remaining time of the PIM neighbor, in hh:mm:ss; "never" means that the
PIM neighbor is always up and reachable.
Dr-Priority/DR Priority: Priority of the PIM neighbor
Mode: Mode of the PIM neighbor. The value "B" means the BIDIR-PIM mode. If nothing is displayed,
it means the non-BIDIR-PIM mode.
Operating Notes
For more information on PIM, see the "PIM-SM (Sparse Mode)" or the "PIMDM (Dense Mode)
chapters in the latest Multicast and Routing Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch(config)# show ip pim neighbor
PIM Neighbors
IP Address VLAN Up Time (sec) Expire Time (sec) DR Priority
--------------- ---- ---------------- ---------------- ----------
10.10.10.2 100 348 90 1
10.20.10.1 200 410 97 1
display pim neighbor Field Mappings.
ProVision SoftwareComware
n/aVPN-Instance public net
n/aTotal Number of Neighbors
IP AddressNeighbor
VLANInterface
UP Time (sec)Uptime
display pim neighbor 231