Comware CLI Commands in Provision Software 2013/06

display pim neighbor <ip> verbose
Related ProVisionComware
show ip pim neighbordisplay pim neighbor <ip> verbose
NOTE: This command is not supported on the HP 2920 Series switches.
Displays information about PIM neighbors.
HP Switch# display pim neighbor 11.110.0.20 verbose
VPN-Instance: n/a
Neighbor: 11.110.0.20
Interface: Vlan-interface100
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: n/a
Generation ID: n/a
Holdtime: n/a
LAN delay: n/a
Override interval: n/a
State refresh interval: n/a
Neighbor tracking: n/a
Bidirectional PIM: n/a
Field Descriptions
VPN-Instance: public net: Public network
Total Number of Neighbors: Total number of PIM neighbors
Neighbor: IP address of the PIM neighbor
Interface: Interface connecting the PIM neighbor
Uptime: Length of time for which the PIM neighbor has been up, in hh:mm:ss
Expires/Expiry time: Remaining time of the PIM neighbor, in hh:mm:ss; "never" means that the
PIM neighbor is always up and reachable.
Dr-Priority/DR Priority: Priority of the PIM neighbor
Mode: Mode of the PIM neighbor. The value "B" means the BIDIR-PIM mode. If nothing is displayed,
it means the non-BIDIR-PIM mode.
Generation ID: Generation ID of the PIM neighbor (a random value indicating a status change of
the PIM neighbor)
Holdtime: Holdtime of the PIM neighbor; "forever" means that the PIM neighbor is always up and
reachable
LAN delay: Prune message delay
Override interval: Prune override interval
State refresh interval: Interval for sending state refresh messages/ Displayed only when the PIM
neighbor works in PIM-DM mode and the state refresh capability is enabled.
Neighbor tracking: Neighbor tracking status (enabled/disabled)
Bidirectional PIM: BIDIR-PIM status (enabled/disabled)
Operating Notes
For more information on PIM, see the "PIM-SM (Sparse Mode)" or the "PIMDM (Dense Mode)
chapters in the latest Multicast and Routing Guide for your switch.
Example of Related ProVision Software Command Output.
display pim neighbor <ip> verbose 233