Comware CLI Commands in Provision Software 2013/06

display poe-power alarm
Related ProVisionComware
show system power-supplydisplay poe-power alarm
NOTE: This command is not supported on the HP 2920 Series switches.
Displays detailed alarm information about the PoE PSUs.
HP Switch# display poe-power alarm
PSU alarm detail, PSU number : 2
PSU 1 alarm : POWERED
PSU 2 alarm : POWERED
Example of Related ProVision Software Command Output.
HP Switch# show system power-supply
Power Supply Status:
PS# | State | AC/DC + V | Wattage
----+-------------+-----------------+---------
1 | Powered | AC 120VDL | 875
2 | Not Present | -- ---- | 0
1 / 2 supply bays delivering power.
Total power: 875 W
Minimum Software Version: 15.10.
display poe-power alarm 243