Comware CLI Commands in Provision Software 2013/06

Field Descriptions
SchemeName: Name of the RADIUS scheme.
Index: Index number of the RADIUS scheme.
Type: Type of the RADIUS server, extended or standard.
Primary Auth Server: Information about the primary authentication server.
Primary Acct Server: Information about the primary accounting server.
Second Auth Server: Information about the secondary authentication server.
Second Acct Server: Information about the secondary accounting server.
IP: Ip address of the server.
Port: Service port of the server. If no port configuration is performed, the default port number is
displayed.
State: Status of the server, active or blocked.
Encryption Key: Shared key for authenticating authentication or accounting packets, in cipher text
or plain text. If no shared key is configured, the value of this field is N/A. This shared key is used
only when no specific shared key is specified for the RADIUS server.
VPN instance: MPLS L3VPN that the server belongs to. If no VPN instance is specified for the server,
the value of this field is N/A.
Auth Server Encryption Key: Shared key for authenticating authentication packets, in cipher text
or plain text.
Acct Server Encryption Key: Shared key for authenticating accounting packets, in cipher text or
plain text.
Accounting-On packet disable: The accounting-on feature is disabled.
send times: Retransmission times of accounting-on packets.
interval: Interval at which the device retransmits accounting-on packets.
Interval for timeout (second): RADIUS server response timeout period, in seconds.
Retransmission times for timeout: Maximum number of attempts for transmitting a RADIUS packet
to a single RADIUS server.
Interval for realtime accounting(minute): Interval for realtime accounting, in minutes.
Retransmission times of realtime-accounting packet: Maximum number of accounting attempts
Retransmission times of stop-accounting packet: Maximum number of stopaccounting attempts
Quiet-interval(min): Quiet interval for the primary server.
Username format: Format of the usernames to be sent to the RADIUS server.
Data flow unit: Unit for data flows sent to the RADIUS server.
Packet unit: Unit for packets sent to the RADIUS server.
NAS-IP address: Source IP address for RADIUS packets to be sent.
Attribute 25: Interprets RADIUS attribute 25 as the CAR parameters.
Operating Notes
For more information on switch RADIUS operation, see the "RADIUS Authentication, Authorization,
and Accounting" chapter in the latest Access Security Guide for your switch.
Example of Related ProVision Software Command Output.
HP Switch# show radius
Status and Counters - General RADIUS Information
display radius scheme 253