Comware CLI Commands in Provision Software 2013/06

display rip interface
Related ProVisionComware
No equivalent ProVision software commanddisplay rip interface
Displays RIP interface information of the RIP process. If no interface is specified, information about
all RIP interfaces of the RIP process is displayed.
HP Switch# display rip 1 interface
Interface-name: Vlan-interface2
Address/Mask:2.2.2.2/24 Version:RIPv2
MetricIn:1 MetricIn route policy:n/a
MetricOut:0 MetricOut route policy:n/a
Split-horizon/Poison-reverse:on/on Input/Output:on/on
Default route:on
Current packets number/Maximum packets number:n/a
Interface-name: Vlan-interface3
Address/Mask:3.3.3.3/8 Version:RIPv1
MetricIn:1 MetricIn route policy:n/a
MetricOut:0 MetricOut route policy:n/a
Split-horizon/Poison-reverse:on/on Input/Output:on/on
Default route:on
Current packets number/Maximum packets number:n/a
Interface-name: Vlan-interface4
Address/Mask:192.168.4.55/16 Version:RIPv1 or RIPv2
MetricIn:1 MetricIn route policy:n/a
MetricOut:0 MetricOut route policy:n/a
Split-horizon/Poison-reverse:on/off Input/Output:on/on
Default route:on
Current packets number/Maximum packets number:n/a
HP Switch# display rip 1 interface vlan-interface 2
Interface-name: Vlan-interface2
Address/Mask:2.2.2.2/24 Version:RIPv2
MetricIn:1 MetricIn route policy:n/a
MetricOut:0 MetricOut route policy:n/a
Split-horizon/Poison-reverse:on/on Input/Output:on/on
Default route:on
Current packets number/Maximum packets number:n/a
Minimum Software Version: 15.10.
display rip interface 257