Comware CLI Commands in Provision Software 2013/06

display route-policy
Related ProVisionComware
show route-mapdisplay route-policy
Displays FIPS state. By default, the FIPS mode is disabled.
HP Switch# display route-policy
Route-Policy : qwer
permit :10
if-match community abcd
permit :11
if-match interface vlan 2
if-match ip-nexthop Prefix test
if-match ipv6-route-source abcd
if-match ipv6-address test
if-match local-preference 32
if-match metric 44
if-match routetype external 2
if-match sourceprotocol static
if-match tag 33
if-match community none
if-match ip-nexthop 1.2.3.4
if-match ipv6-nexthop 2001:db8:85a3::8a2e:370:7334
if-match as-path test
apply origin egp
Route-Policy : test
permit :12
if-match community test
deny :20
apply metric 3
apply tag 33
apply asPathPrepend
apply weight 44
Example of Related ProVision Software Command Output.
HP Switch# show route-map Map3
Routemap information
route-map "Map3" permit seq 10
match interface vlan 11 12 13
match metric 25
exit
route-map "Map3" permit seq 20
match interface vlan 21 22 23
match metric 25
exit
For more information, see the latest Multicast and Routing Guide for your switch.
262 Display Commands