Comware CLI Commands in Provision Software 2013/06

display saved-configuration by-linenum
Related ProVisionComware
show configdisplay saved-configuration by-linenum
Displays the saved configuration of the switch with the line number. This command adds the line
number to the output of display saved-configuration. This command is available only in manager
mode.
HP Switch# display saved-configuration by-linenum
; J8692A Configuration Editor; Created on release #K.15.09.0000x
; Ver #03:01.1f.ef:f2
1: hostname "HP-E3500yl-24G"
2: module 1 type J86xxA
3: snmp-server community "public" Unrestricted
4: vlan 1
5: name "DEFAULT_VLAN"
6: untagged 1-24
7: ip address dhcp-bootp
8: exit
Example of Related ProVision Software Command Output.
HP Switch# show config
Startup configuration:
; J8697A Configuration Editor; Created on release #K.14.01
hostname "HP Switch"
module 1 type J8705A
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged A1-A24
ip address dhcp-bootp
exit
interface A1
rate-limit all out kbps 200
exit
interface A2
rate-limit all out kbps 200
exit
interface A3
rate-limit all out kbps 200
exit
interface A4
rate-limit all out kbps 200
exit
interface A5
rate-limit all in percent 200
exit
interface A6
rate-limit icmp percent 60
rate-limit mcast in percent 60
exit
Operating Notes
For more information, refer to the latest Management and Configuration Guide for your switch.
Minimum Software Version: 15.10.
264 Display Commands