Comware CLI Commands in Provision Software 2013/06

display schedule reboot
Related ProVisionComware
show reload < after | at >display schedule reboot
Displays the user-configured switch reboot (reload) time. For example, if the current date and time
is March 21, 2012 at 1:05 PM (13:05), and the switch is configured to reboot (reload) at 5:00
PM (17:00) on the same date, then you would see the following output when executing this
command:
HP Switch(config)# display schedule reboot
System will reboot at 17:00 03/21/2012 (in 3 hours and 55
minutes).
Operating Notes
To configure a reboot time on the switch, use the following command:
[no] reload [ after | at ]
For more on using the reload command, refer to the “Switch Memory and Configuration” chapter
in the latest Basic Operation Guide for your switch.
Minimum Software Version: 15.08.
Example of Related ProVision Software Command Output.
HP Switch(config)# show reload at
Reload scheduled for 17:00:52 02/21/2012
(in 0 days, 3 hours, 55 minutes)
display schedule reboot 265