Comware CLI Commands in Provision Software 2013/06

display snmp-agent mib-view
Related ProVisionComware
show snmpv3 groupdisplay snmp-agent mib-view
Displays the View name, MIB Subtree, Subtree mask, Storage-type, View Type, and View status.
This command is available only in manager mode.
HP Switch# display snmp-agent mib-view
View name: DiscoverView
MIB Subtree: 1.3.6.1.6.3.15.1.2.2.1.7
Subtree mask:
Storage-type: readOnly
View Type: included
View status: notInService
Storage-type: readOnly
View name: DiscoverView
MIB Subtree: 1.3.6.1.6.3.15.1.2.2.1.10
Subtree mask:
Storage-type: readOnly
View Type: included
View status: notInService
Example of Related ProVision Software Command Output.
HP Switch# show snmpv3 group
Status and Counters - SNHP v3 Global Configuration Information
Security Name Security Model Group Name
------------------------ -------------- -----------------
CommunityManagerReadOnly ver1 ComManagerR
CommunityManagerReadWrite ver1 ComManagerRW
CommunityOperatorReadOnly ver1 ComOperatorRW
CommunityOperatorReadWrite ver1 ComOperatorRW
CommunityManagerReadOnly ver2c ComManagerR
CommunityManagerReadWrite ver2c ComManagerRW
CommunityOperatorReadOnly ver2c ComOperatorRW
CommunityOperatorReadWrite ver2c ComOperatorRW
NetworkMgr ver3 ManagerPriv
NetworkAdmin ver3 OperatorNoAuth
Operating Notes
For more information, refer to the latest Management and Configuration Guide for your switch.
Minimum Software Version: 15.10.
display snmp-agent mib-view 271