Comware CLI Commands in Provision Software 2013/06

display stp bpdu-statisticsdisplay stp bpdu-statistics interface GigabitEthernet
<port-num>display stp bpdu-statistics interface GigabitEthernet <port-num>
instance <instanceNUM, 1-32>
Related ProVisionComware
show spanning-tree detaildisplay stp bpdu-statistics
display stp bpdu-statistics interface GigabitEthernet
<port-num>
display stp bpdu-statistics interface GigabitEthernet
<port-num> instance <instanceNUM, 1-32>
Displays the debug counters of the STP in different modes.
In MSTP mode :
• If MSTI or port is not specified, this command displays the BPDU statistics of all MSTIs on all
ports. The displayed information is sorted by port name and by MSTI ID on each port.
• If a port is specified but not an MSTI, this command displays the BPDU statistics of all MSTIs
on the port. The displayed information is sorted by MSTI ID.
• If both an MSTI ID and a port are specified, this command displays the BPDU statistics of the
specified MSTI on the port.
In STP, RSTP, or PVST mode:
• If no port is specified, this command displays the BPDU statistics of on all ports. The displayed
information is sorted by port name.
• If a port is specified, this command displays the BPDU statistics on the port.
HP Switch# stp bpdu-statistics interface 2 instance 2
Port: 2
Instance-independent:
Type Count Last Updated
--------------------------- ---------- -----------------
Invalid BPDUs 0
Looped-back BPDUs 0
MAX-aged BPDUs 0
TCN sent 0
TCN received 0
TCA sent 0
TCA received 0
Config sent 0
Config received 0
RST sent 0
RST received 0
MST sent 0
MST received 0
Instance 2:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 0
TC sent 0
TC received 0
display stp bpdu-statisticsdisplay stp bpdu-statistics interface GigabitEthernet <port-num>display stp bpdu-statistics interface
GigabitEthernet <port-num> instance <instanceNUM, 1-32>
287