Comware CLI Commands in Provision Software 2013/06

display this
Related ProVisionComware
No equivalent ProVision software commanddisplay this
Displays valid configuration information under the current view. Use this command to check whether
your configuration has taken effect. Valid configuration that is the same as the default is not
displayed. Invalid configuration is not displayed. Execution of this command in any user interface
view displays the valid configuration in all the user interfaces. Execution of this command in any
VLAN view displays the configurations of all the created VLANs.
HP Switch# display this
vlan 1
name "DEFAULT_VLAN"
no untagged 1-2,48
untagged 3-47
ip address dhcp-bootp
exit
vlan 10
name "VLAN10"
untagged 1,48
ip address 10.10.10.3 255.255.255.0
ip igmp
exit
vlan 30
name "VLAN30"
untagged 2
ip address 30.30.30.2 255.255.255.0
ip igmp
ip rip 30.30.30.2
ip pim-sparse
ip-addr any
exit
exit
Minimum Software Version: 15.10.
display this 301