Comware CLI Commands in Provision Software 2013/06

display transceiver interface
Related ProVisionComware
show interface transceiver [<port> | detail ]display transceiver interface
Displays main parameters of a single or all pluggable transceivers.
HP Switch(config)# display transceiver interface g1
G1 transceiver information:
Transceiver Type : 10GbE-SR
Connector Type : SC
Wavelength(nm) : 850nm
Transfer Distance(m) : 300m (MM generic)
Digital Diagnostic Monitoring : YES
Vendor Name : n/a
Ordering Name : J8436A
Field Descriptions
transceiver information: Pluggable transceiver information
Connector Type: Type of the connectors of the transceiver:
• Optical connectors, including SC (SC connector, developed by NTT) and LC (LC connector,
1.25 mm/RJ-45 optical connector developed by Lucent).
• Other connectors, including RJ-45 and CX 4.
Wavelength(nm):
• Optical transceiver: Central wavelength of the laser sent, in nm. If the transceiver supports
multiple wavelengths, every two wavelength values are separated by a comma.
• Electrical transceiver: Displayed as N/A.
Transfer distance(xx): Transfer distance, with xx representing km for singlemode transceivers and
m for other transceivers. If the transceiver supports multiple transfer medium, every two values of
the transfer distance are separated by a comma. The corresponding transfer medium is included
in the bracket following the transfer distance value. The following are the transfer media:
• 9 um: 9/125 um single-mode fiber
• 50 um: 50/125 um multi-mode fiber
• 62.5 um: 62.5/125 um multi-mode fiber
• TP: Twisted pair
• CX4: CX4 cable
Digital Diagnostic Monitoring: Whether the digital diagnosis function is supported, where:
• YES: Supported
• NO: Not supported
Vendor Name: Vendor name or name of the vendor who customizes the transceiver:
• H3C anti-spoofing transceiver (customized): H3C is displayed.
• Other transceivers: The vendor name is displayed; if the vendor is unknown or illegal, unknown
is displayed.
Ordering Name:
• H3C devices: Switch model is displayed
• Other devices: N/A is displayed.
308 Display Commands