Comware CLI Commands in Provision Software 2013/06

display vrrp
Related ProVisionComware
show vrrpdisplay vrrp
NOTE: This command is not supported on the HP 2920 Series switches.
Displays vrrp details like VLAN, status, priority, and router ip address.
HP Switch# display vrrp
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 2
Interface VRID State Run Adver Auth Virtual
Pri Timer Type IP
-------------------------------------------------------------
Vlan4 4 Initialize 144 1 None 14.4.1.1
Vlan4 5 Initialize 154 1 None 14.4.2.1
Field Descriptions
Run Mode: Current VRRP working mode, including:
• Standard: Standard protocol mode
• Load Balance: Load balancing mode
Run Method: Current VRRP running mode, including
• Real MAC: Real MAC mode, which means the virtual IP address of the VRRP group is mapped
to the real MAC address of the interface.
• Virtual MAC: Virtual MAC mode, which means the virtual IP address of the VRRP group is
mapped to the virtual MAC address.
Total number of virtual routers: Number of VRRP groups
Interface: Interface to which the VRRP group belongs
VRID: ID of the VRRP group
Run Pri: Running priority of the router, or in other words, the current priority of the router. With
VRRP tracking configured, when the state of the monitored interface or track entry changes, the
priority of the router changes.
Adver. Timer: VRRP advertisement interval, in seconds
Auth Type: Authentication type, including
• None: No authentication
• Simple: Simple text authentication
• MD5: MD5 authentication
Virtual IP: Virtual IP address of the VRRP group
Example of Related ProVision Software Command Output.
HP Switch# show vrrp config
VRRP Global Configuration Information
314 Display Commands