Comware CLI Commands in Provision Software 2013/06

restore startup-configuration
Related ProVisionComware
copy tftp startup-configrestore startup-configuration
Used to download a configuration file from the specified TFTP server to the switch and specify the
configuration file as the startup configuration file to be used at the next startup of the switch. The
command is supported in manager mode. When you download a config file from a remote server
which has same name as current active startup config file name (but both are not identical) then
after downloading the file the switch reboots itself. In this case, the command triggers the download
of the config file from the remote server but the next startup-configuration file is not configured.
A maximum of 3 config files can be stored on the switch. There are no restrictions on the file name.
HP Switch# restore startup-configuration from 120.93.49.9
restore_test
This will change the default configuration file to be used
whenever the switch is rebooted. Continue [y/n]?
Related ProVision Software Command.
HP Switch# copy tftp startup-config
Operating Notes
For more information, refer to the latest Management and Configuration Guide for your switch.
Minimum Software Version: 15.10.
338 Fundamental Commands