Comware CLI Commands in Provision Software 2013/06
ProVision Command Location(s)ProVision CommandComware Configuration Command
Advanced Traffic Management GuideSee class or policyHP Switch(config)# policy-based-route
Multicast and Routing GuideSee ip proxy-arpHP Switch(eth-1)# proxy-arp
Advanced Traffic Management GuideSee class or policyHP Switch(config)# qos apply
Advanced Traffic Management GuideSee class or policyHP Switch(config)# qos policy
Access Security GuideRADIUS configuration is executed at
the global level with the
HP Switch(config)# radius server
radius-server command. A
global key can be specified that is
used by all servers, or individual keys
(shared secrets) can be specified for
individual servers.
Management and Configuration
Guide
See clear statHP Switch(config)# reset
Multicast and Routing GuideIPv6
Configuration Guide
See clear arp or clear ipv6
neighbors
HP Switch(config)# reset arp
Multicast and Routing GuideSee router ripHP Switch(config)# rip
Multicast and Routing GuideSee route-mapProvision’s set action
is the same as Comware’s apply
action.
HP Switch(config)# route-policy
Advanced Traffic Configuration GuideSee router bgp distanceHP Switch(config)# router bgp preference
Multicast and Routing GuideAreas are applied in VLAN contextHP Switch(config)# router ospf area
Multicast and Routing GuideSee router ospf nonstopHP Switch(config)# router ospf
graceful-restart
Multicast and Routing GuideSee router ospf distanceHP Switch(config)# router ospf
preference
IPv6 Configuration GuideSee router ospf3 distanceHP Switch(config)# router ospf3
preference
Multicast and Routing GuideSee router pim ipv6ProVision
supports MLD and IPv6 unicast
HP Switch(config)# router pim ipv6
routing, but IPv6 addressing is not
supported by PIM-DM or PIM-SM.
Multicast and Routing GuideSee router rip distanceHP Switch(config)# router rip preference
Multicast and Routing GuideSee ip router-idHP Switch(config)# router-id
Management and Configuration
Guide
See disableHP Switch(eth-1)# shutdown
Management and Configuration
Guide
See snmp-serverHP Switch(config)# snmp-agent
Advanced Traffic Management GuideSee spanning-tree
pending-apply
HP Switch(config)# spanning-tree active
Advanced Traffic Management GuideSee spanning-tree
legacy-mode
HP Switch(config)# spanning-tree
compliance
Advanced Traffic Management GuideSee spanning-tree admin-edgeHP Switch(config)# spanning-tree
edged-port
Advanced Traffic Management GuideSee spanning-tree
legacy-mode
HP Switch(config)# spanning-tree mode
Advanced Traffic Management GuideSee spanning-tree
config-name
HP Switch(config)# spanning-tree
region-name
358 Comware Configuration Help Commands