Comware CLI Commands in Provision Software 2013/06

display dns < domain | server >
Related ProVisionComware
show ip dnsdisplay dns < domain | server >
show ip
Displays the current IPv4 DNS domain name suffixes and server configuration.
HP Switch# display dns domain
Type:
D:Dynamic S:Static
No. Type Domain-name
1 S atlantic.widgetcorp.net
HP Switch# display dns server
Type:
D:Dynamic S:Static
DNS Server Type IP Address
1 S 10.110.34.51
2 S 10.110.34.101
Field Descriptions
No.: Sequence number.
Type: Shows the type of domain name suffix. S means a statically configured domaine name suffix.
D means a domain name suffix obtained dynamically through DHCP.
Domain-name: The domain name suffix.
DNS Server: The sequence number of the DNS server.
IP Address: The IPv4 address of the DNS server(s).
Operating Notes
The switch supports one domain suffix entry and two DNS server IP address entries.
To configure DNS operation in ProVision software, use one of the following commands:
ip dns dhcp
ip dns domain-name < name-str >
ip dns server-address priority < 1 | 2 > < ip-addr | ipv6-addr >
For more on configuring dns, refer to the “Troubleshooting” chapter in the latest Management and
Configuration Guide for your switch.
Minimum Software Version: 15.08.
Example of Related ProVision Software Command Output.
HP Switch# show ip dns
DNS Mode : DHCP
Domain Suffix : americas.hpqcorp.net
DNS Servers Configured :
----------------------
Priority DNS Server Addresses
-------- --------------------
display dns < domain | server > 55