Comware CLI Commands in Provision Software 2013/06

display garp timer interface <port_list>
Related ProVisionComware
show gvrpdisplay garp timer interface <port_list>
Display GARP timer in a specified port.
HP Switch# display garp timer interface a2
GARP timers on port A2
Garp Join Time : 20 centisecounds
Garp Leave Time : 300 centisecounds
Garp LeaveAll Time : 1000 centisecounds
Garp Hold Time : (n/a)
Example of Related ProVision Software Command Output.
HP Switch# show gvrp
GVRP support
Maximum VLANs to support [256] : 256
Primary VLAN : DEFAULT_VLAN
GVRP Enabled [No] : Yes
Port Type | Unknown VLAN Join Leave Leaveall
---- -------- + ------------ ----- ----- --------
1 10/100TX | Learn 20 300 1000
2 10/100TX | Learn 20 300 1000
3 10/100TX | Learn 20 300 1000
4 10/100TX | Learn 20 300 1000
5 10/100TX | Learn 20 300 1000
6 10/100TX | Learn 20 300 1000
. . . . . .
Operating Notes
Depending on the device, ProVision displays port numbers as A1, B1, etc. or 1,2, etc. or 1/1,
2/1, etc.
Any display output field not supported in Provsion is displayed as n/a.
For more information, see the latest Advanced Traffic Management Guide for your switch.
78 Display Commands