Comware CLI Commands in Provision Software 2013/06

display hwtacacs
Related ProVisionComware
show tacacsdisplay hwtacacs
Displays the configuration information or statistics of HWTACACS schemes. This command is
available only in manager mode.
HP Switch# display hwtacacs
-------------------------------------------------------------
HWTACACS-server template name : n/a
Primary-authentication-server : 1.2.3.4:n/a
VPN instance : n/a
Primary-authorization-server : 1.2.3.4:n/a
VPN instance : n/a
Primary-accounting-server : 1.2.3.4:n/a
VPN instance : n/a
Secondary-authentication-server : 6.7.8.9:n/a
VPN instance : n/a
Secondary-authorization-server : 6.7.8.9:n/a
VPN instance : n/a
Secondary-accounting-server : 6.7.8.9:n/a
VPN instance : n/a
Current-authentication-server : 1.2.3.4:n/a
VPN instance : n/a
Current-authorization-server : 1.2.3.4:n/a
VPN instance : n/a
Current-accounting-server : 1.2.3.4:n/a
VPN instance : n/a
Nas-IP address : n/a
key authentication : authentication
key authorization : authentication
key accounting : authentication
Nas-IP address : n/a
VPN instance : n/a
Quiet-interval(min) : n/a
Realtime-accounting-interval(min) : n/a
Response-timeout-interval(sec) : 5
Acct-stop-PKT retransmit times : n/a
Username format : n/a
Data traffic-unit : n/a
Packet traffic-unit : n/a
-------------------------------------------------------------
Total 1 HWTACACS scheme(s).
84 Display Commands