Comware CLI Commands in Provision Software 2013/06

Version2-querier-present-timer-expiry: Remaining time of the IGMPv2 querier present timer, where
"off" means that the timer never expires
Example of Related ProVision Software Command Output.
There is no direct equivalent ProVision command.
HP Switch# show ip igmp vlan 30
IGMP Service Protocol Info
Total VLANs with IGMP enabled : 2
Current count of multicast groups joined : 5
IGMP Filter Unknown Multicast: Disabled
IGMP Filter Unknown Multicast Status: Disabled
VLAN ID : 30
VLAN Name : VLAN30
IGMP version : 2
Querier Address [this switch] : 75.1.30.1
Querier Port :
Querier UpTime : 5d 18h 39m 7s
Querier Expiration Time : 0h 0m 4s
Active Group Addresses Type Expires Ports Reports Queries
---------------------- ---- ------- ------- ------ -------
239.1.1.1 Filter 0h 2m 25s A2 3961 0
239.1.1.2 Filter 0h 2m 25s A2 3961 0
239.1.1.3 Filter 0h 2m 25s A2 3961 0
239.1.1.4 Filter 0h 2m 25s A2 3961 0
239.1.1.5 Filter 0h 2m 24s A2 3961 0
Operating Notes
ProVision does not support VPN instance.
For more information, see the latest Multicast and Routing Guide for your switch.
display igmp interface 97