FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 Release Notes, Version B.11.23.03

FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 Release Notes

Driver Versions

Chapter 1

Driver Versions

The driver versions for each release of the FibrChanl-01 (fcd) driver:

Known Problems Fixed in This Version

The following defect ﬁxes were included in the 11.23.03 version of the FibrChanl-01 (fcd) driver in the HP-UX

11i v2 March 2005 release. To view the entire details of each defect ﬁx, refer to the HP IT Resource Center at

http://forums1.itrc.hp.com/service/forums/home.do.

The defects listed below exist in fcd version B.11.23.02 and have been ﬁxed in fcd version B.11.23.03

Table 1-1 FibrChanl-01 (fcd) Driver Version History

Release Revision

AR0903

AR1203

AR0304 B.11.23.01 (64-bit)

AR0604

HP-UX 11i v2 September 2004 B.11.23.02 (64-bit)

March 2005 B.11.23.03 (64-bit)

Table 1-2 HP-UX 11i v2 March 2005 Fixes

SR Number Description

8606388386 DMA related changes are needed in the driver for non- HP platform support

8606388337 Data corruption with A6826A and AB465A on rx1620

8606377181 The fcd driver can now report when an unrecoverable hardware error occurs

8606380621 Calling HBA_SendCTPassThru() with a large ReqBufferSize may cause a panic

8606381090 HBA_GetFcpTargetMapping() can affect normal access to tape

8606390263 VxVM interoperability issue with the fcd driver, due to ﬁrst open time of 30 sec. or more

8606381439 Enhancement Request of fcmsutil(1M) for the A6826A PCI-X Dual Port Fibre Channel adapter

8606382677 Uncompressed Full Dump Save Failure

8606389639 FC10 may not be detected on boot-up ioscan

8606384254 Superdome running 11.23PI with 1 TB memory could not do a full dump

8606390267 vgexport/vgimport commands hang - timeout fuction is needed

8606392115 “CLAIMED” message and ioscan description string should indicate HBA product number