A6826A Fibre Channel Mass Storage Adapter Installation Guide, February 2007

OpenVMS Installation
Attach Other Devices
Chapter 2
22
Attach Other Devices
Attaching a Fibre Channel HBA to other Fibre Channel devices.
1. Be sure you have removed the Fibre Channel host bus adapter’s optical port protector (if included).
2. Be sure you have attached a connector cable to the Fibre Channel host bus adapter. Align the slotted plug
with the keyed connector. Push the connector in until you hear it click.
3. Attach the free end of the cable to a compatible Fibre Channel device.
4. Reconnect the power cord, if necessary, and power up the system.
The following table lists the Fibre Channel cables that you can use with Fibre Channel Host Bus Adapters.
Be sure to use LC-LC or LC-SC cables for the A6826A.
Table 2-1 Cable Products
LC-LC
221692-B21 Fibre Optic Cable 2m LC/LC Duplex 50/125 M/M
221692-B23 Fibre Optic Cable 15m LC/LC Duplex 50/125 M/M
221692-B26 Fibre Optic Cable 30m LC/LC Duplex 50/125 M/M
221692-B27 Fibre Optic Cable 50m LC/LC Duplex 50/125 M/M
LC-SC
221691-B21 Fibre Optic Cable 2m LC/SC Duplex 50/125 M/M Optical
221691-B23 Fibre Optic Cable 15m LC/SC Duplex 50/125 M/M Optical