HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes HP-UX 11i v3 HP Part Number: J2635-90047 Published: March 2009
© Copyright 2006-2009 Hewlett Packard Development Company, L.P Legal Notices © Copyright 2006-2009 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license.
Table of Contents 1 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes.............................5 Overview.................................................................................................................................................6 Driver Versions..................................................................................................................................6 What is New in This Version.........................................................................
List of Tables 1-1 1-2 4 Fibre Channel Driver Version History............................................................................................6 Defects Fixed...................................................................................................................................
1 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes This document discusses the most recent product information pertaining to the FibrChanl-00 (td) HP PCI Tachyon TL/TS/XL2 Fibre Channel driver supported on the HP-UX 11i v3 operating system.
Overview The HP PCI Tachyon TL/TS/XL2 Fibre Channel driver manages the following single port Host Bus Adapters (HBAs): • • A5158A PCI Tachyon TL/TS Adapter A6795A PCI Tachyon XL2 Adapter The A5158A and A6795A HBAs support Fabric Login between the host and storage devices. This feature enables better performance and fault isolation. The A6795A HBA supports link speeds of 1 Gbps and 2 Gbps. The A5158A HBA supports a link speed of 1 Gbps only.
Table 1-1 Fibre Channel Driver Version History (continued) Release HP-UX 11.00 HP-UX 11i v1 HP-UX 11i v1.6 HP-UX 11i v2.0 Web Release 0811 Application Release 0903 HP-UX 11i v3.0 B.11.31.0811 (64-bit) B.11.11.18 (32-bit or 64-bit) B.11.23.0903 (64-bit) B.11.31.0903 (64-bit) What is New in This Version This version of the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver contains only defect fixes and does not offer any new feature.
# swinstall -x autoreboot=true -x reinstall=true -x reinstall_files=true \ –s /tmp/<11.31_depot> FibrChanl-00 The following message is displayed: Execution Phase succeeded Verifying the HP PCI Tachyon XL2 Fibre Channel Driver Installation To verify whether the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully on your system, complete the following steps: 1.
NOTE: For information about errors encountered during the installation, removal, reinstallation, and verification of the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver, see the error log files at /var/adm/sw.
Support Guide This document provides a product overview, and discusses additional features and regulatory information. It also describes how to install, configure, troubleshoot, and maintain the driver. Installation Guide This document describes how to install software and hardware for specific HBAs.
