HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes, March 2009

# swinstall -x autoreboot=true -x reinstall=true -x reinstall_files=true \ –s /tmp/<11.31_depot> FibrChanl-00
The following message is displayed:
Execution Phase succeeded
Verifying the HP PCI Tachyon XL2 Fibre Channel Driver Installation
To verify whether the FibrChanl-00 HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed
successfully on your system, complete the following steps:
1. Enter the following command at the HP-UX prompt:
# swlist FibrChanl-00
Where:
FibrChanl-00 is the bundle name for the HP PCI Tachyon TL/TS/XL2 Fibre Channel
driver.
If the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully on the
system, the following message is displayed:
# Initializing...# Contacting target "hostname"...## Target: hostname:/# FibrChanl-00
B.11.31.0903 FibreChannel; HW=A6795A,A5158AFibrChanl-00.FC-TACHYON-TL
B.11.31.0903 FibreChannel (TD) Driver
2. Enter the following command at the HP-UX prompt:
# swverify FibrChanl-00
The following message is displayed:
Verification Succeeded
8 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Release Notes