HP 37722A telecom analyzer HP 37732A telecom/datacom analyzer Technical specifications
Introduction The HP 37722A telecom analyzer is an easy-to-use, lightweight fieldportable test set for in-service and out-of-service bit error and signal measurement on CEPT digital circuits and services. The HP 37722A analyzer provides framed/unframed pattern generation and measurements at and 2 Mb/s.
Specifications for telecom testing using the HP 37722A telecom analyzer or the HP 37732A telecom/datacom analyzer Telecom specifications Transmitter Receiver Bit rates: 2.048 Mb/s, 64 kb/s; optional 8.448 Mb/s, 704 kb/s, sub64 kb/s. Frame structure: 2 Mb/s unframed, to ITU-T G.704, G.706, G.732, G.704: with no multiframe; with CAS multi-frame with/ without CRC4 multiframe; 64 kb/s codirectional; independent setting for transmitter and receiver. Interfaces: To ITU-T G.703 and G.823.
Datacom testing using the HP 37732A telecom/datacom analyzer Datacom specifications Datacom interfaces: V.24, V.11/X.21-leased, V.35. Terminal emulation: DTE, DCE. Timing modes: Synchronous from 50 b/s to 2.048 Mb/s; asynchronous from 50 b/s to 19.2 kb/s (except X.21-leased). Asynchronous mode Rates: 50, 75, 110, 134.5, 150, 200, 300, 600 b/s; 1.2, 1.8, 2.4, 4.8, 7.2, 9.6, 19.2 kb/s. Character length: 5, 6, 7 or 8 bits. Parity: Odd, even, 0, 1 or none. Stop bits: 1, 1.5 or 2.
Telecom and datacom measurements Telecom measurements Datacom measurements All measurements are simultaneous. All measurements are simultaneous. Errors At 2048 kb/s have error count, average error ratio, error free seconds, % error free seconds of: bit (64 and 2048 kb/s), code, frame bit, CRC4, REBE (remote end block error – E bits). ITU-T M.2100 analysis ES, SES and availability for maintenance monitoring of transmit and receive directions.
Specifications of options available for both analyzers 8 Mb/s measurements (Option 002) Adds framed and unframed pattern generation and measurements at 8 Mb/s. All specifications same as 2 Mb/s except: Clock: 8.448 Mb/s (internal), 500 kHz to 9 MHz (external). Line code: HDB3. Ternary data input: 8.448 Mb/s ± 100 ppm. 704 kb/s measurements (Option 003) Adds framed/unframed pattern generation and measurements at 704 kb/s. All specifications same as 2 Mb/s except: Clock: 704 kb/s.
Relative frequency and bit slips (Option 010) ITU-T M.2110 and M.2120 analysis (Option 210) 2.048 Mb/s only Measurement start at userspecified time. Summary print of current settings and counts. Measures relative frequency of, and bit slips between, two ITU-T G.703 2 Mb/s signals. Results displayed as +ve and −ve peak wander (UI), cumulative bit slips, frequency offset (ppm) and graph of bit slips (256, 16 UI). Reference input level: 0 to −20 dBm. Connector: BNC 75 ohm, unbalanced. ITU-T M.
Enhance your network test and maintenance strategy For more information about HewlettPackard test & measurement products, applications, services, and for a current sales office listing, visit our web site, http://www.hp.com/go/tmdir. You can also contact one of the following centers and ask for a test and measurement sales representative. United States: Hewlett-Packard Company Test and Measurement Call Center P.O. Box 4026 Englewood, CO 80155-4026 1 800 452 4844 Canada: Hewlett-Packard Canada Ltd.