HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

ValueDescriptionTypeProperty
3 - Quality of Service Alert. An Indication
of this type is principally associated with a
degradation or errors in the performance or
function of an entity.
4 - Processing Error. An Indication of this
type is principally associated with a software
or processing fault.
5 - Device Alert. An Indication of this type
is principally associated with an equipment
or hardware fault.
6 - Environmental Alert. An Indication of this
type is principally associated with a
condition relating to an enclosure in which
the hardware resides, or other environmental
considerations.
7 - Model Change. The Indication addresses
changes in the Information Model. For
example, it may embed a Lifecycle
Indication to convey the specific model
change being alerted.
8 - Security Alert. An Indication of this type
is associated with security violations,
detection of viruses, and similar issues.
Set to 3PAR alert type string, e.g.,
“Component state change”.
A string describing the Alert type - used
when the AlertType property is set to 1.
stringOtherAlertType
3PAR Alert Severity – PerceivedSeverityAn enumerated value that describes the
severity of the Indication.
uint16PerceivedSeverity
• FATAL – Fatal (7)
• CRITICAL – Critical (6)
• MAJOR – Major (5)
• MINOR – Minor (4)
• DEGRADED – Degraded (3)
• INFORMATIONAL – Informational
(2)
• DEBUG – Other (1)
If PerceivedSeverity is ‘Other’, then this
contains the string value “Debug”.
Otherwise this is NULL.
Holds the value of the user defined severity
value when ‘PerceivedSeverity' is 1
("Other").
stringOtherSeveirty
System WWNstringSystemName
NULLList of IndicationIdentifiers whose
notifications are correlated with this one.
stringCorrelatedIndications
“SNIA”A string that uniquely identifies the entity that
owns the definition of the format of the
Message described in this instance.
stringOwningEntity
NULLA string that uniquely identifies, within the
scope of the OwningEntity, the format of the
Message.
stringMessageID
NULLAn array containing the dynamic content of
the message.
stringMessageArguments
Alert description string, e.g., “Cage 0
Degraded (Firmware CPU Old)”
The formatted message. This message is
constructed by applying the dynamic content
of the message, described in
stringMessage
MessageArguments, to the format string
AlertIndication 141