HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

"UserSpaceLimit is the consumption limit for the allocated "
"user space of the associated StorageVolumes. Please note "
"that SpaceLimit refers to the consumption limit of the "
"allocated space of a DynamicStoragePool or the snap space "
"(DeltaReplicaStoragePool) of the associated StorageVolumes. "
"Applicable only to thin provisioned volumes. "
"If UserSpaceLimit = 0 (the default) then no limits are asserted "
"on the amount of space consumed."),
Units ( "Bytes" )]
uint64 UserSpaceLimit = 0;
[Description (
"If the associated storage volume may dynamically consume "
"an increasing amount of user space and the user space limit "
"is enforced on the volume, then a non-zero warning threshold "
"percentage indicates when a warning indication should be "
"generated based on the total amount of space consumed being "
">= (UserSpaceLimit*UserSpaceLimitWarningThreshold)/100."
"Please note that SpaceLimitWarningThreshold refers to "
"the threshold of allocated space of a DynamicStoragePool or "
"the snap space (DeltaReplicaStoragePool) of the associated "
"StorageVolumes.\n "
"Applicable only to thin provisioned volumes."),
Units ( "Percentage" ), MinValue ( 0 ), MaxValue ( 100 )]
uint16 UserSpaceLimitWarningThreshold;
[Write, Description (
"The DynamicStoragePool (DSP) the snapshot data (SD) "
"are provisioned from.\n")]
String SnapDSPName;
[Write, Description (
"The DynamicStoragePool (DSP) the user space "
"is provisioned from.\n")]
String UserDSPName;
[Write, Description (
"If TRUE, the volume or pool is thinly provisioned.") ]
boolean ThinlyProvisioned;
[Write, Description (
"Define volume policy. The available policies are: "
"DisallowStaleSnapshot - When copy-on-write fails, don't write to r/w "
" base so that r/o snapshots remain valid/consistent with r/w "
" base. This means failures to update snapshot will be "
" considered a failure to write to the base volume as well. "
"AllowStaleSnapshot - When copy-on-write fails, allow write to r/w base "
" to succeed, but snapshot becomes invalid or stale. This means "
" failures to update snapshot will not affect the write to the "
" base volume, but the snapshot will then be considered invalid. "
" This is the default setting. "
"System - Volume is intended to be used for internal system purposes."
"NoSystem - The volume is not intended to be used for internal system "
" purposes."
"OneHost - This constrains the export of a volume to one host or "
" one host cluster (when cluster names may be used as a "
" host name). Unless the volume is under the complete "
" control of a cluster aware application, multiple hosts "
" (with NoOneHost policy) will corrupt each other's data. "
"NoOneHost - This policy should only be used when exporting a volume to "
" multiple hosts for use by a cluster-aware application, "
" or if your shop uses 'port presents' VLUNs. "
" This is the default policy setting."
"ZeroDetect - Check If incoming data is zero. If so, reclaim the space."
"NoZeroDetect - No need to check if incoming data is zero."
"Possible value is a combination of following values: "
3PAR_TPD.mof 181