HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

"Override existing lower priority VLUNs, if necessary. "
"Can be used only when exporting to a specific host. "
"This parameter is a vendor-specific extension for HP 3PAR. "
"The default value is false.")]
boolean Override,
[IN, Description (
"Do not issue a VLUN (Virtual Logical Unit Number) Change "
"Notification (VCN) after export. For direct connect or "
"loop configuration, a VCN consists of a Fibre Channel "
"Loop Initialization Primitive (LIP). For fabric "
"configuration a VCN consists of Registered State Change "
"Notification (RSCN) being sent to the fabric controller. "
"This parameter is a vendor-specific extension for HP 3PAR. "
"The default value is false.")]
boolean NoVCN,
[OUT, Description (
"An array of descriptive text of the result of the operation, "
"with each entry containing the result of the "
"expose Default LU operation.")]
string ResultDescriptions[]);
[Deprecated { "HidePaths" },
Override ("HideDefaultLUs"), Description (
"HP 3PAR version of the HideDefaultLUs operation, adding an extra "
"property ResultDescription to better describe the result "
"of the hide default logical units operation\n"
"\n"
"This method is deprecated in favor of HidePaths."
"\n"
"Hide a list of SCSI logical units (such as RAID volumes or "
"tape drives) through a list of target ports on a default "
"view SCSIProtocolController (SPC). \n"
"\n"
"The parameters for this method are: Job - null if no job "
"created, otherwise this is a reference to the job. LUNames "
"- the list of names of the logical units to use. "
"TargetPortIDs - the names of the target ports to use. "
"DeviceNumbers (optional) - the device numbers (LUNs) to use. "
"This is a HP 3PAR extension."
"ProtocolControllers - SPCs involved in this operation. \n"
"\n"
"The LUNames and the optional DeviceNumbers parameters "
"are mutually indexed arrays - any element in DeviceNumbers "
"will set a property relative to the "
"LogicalDevice instance named in the corresponding element "
"of LUNames. DeviceNumbers MUST be null (the provider will "
"deduce the DeviceNumbers of all the LU's in LUNames) or have "
"the same number of elements as LUNames. If these conditions "
"are not met, the instrumentation MUST return a 'Invalid Parameter' "
"status or a CIM_Error. \n"
"\n"
"When hiding logical units, HP 3PAR Storage System supports only "
"the Remove LUs from a default view use case. "
"Remove LUs from a default view requires that the "
"LUNames parameter not be null and that the TargetPortIDs "
"parameters be null. \n"
"\n"
"The SPC is automatically deleted when the last logical unit "
"is removed since SPCAllowsNoLUs is false."),
ValueMap { "0", "1", "2", "3", "4", "5", "6..4095", "4096",
"4097", "4098", "4099", "4100..32767", "32768..65535" },
Values { "Success", "Not Supported", "Unspecified Error",
"Timeout", "Failed", "Invalid Parameter", "DMTF Reserved",
"Method Parameters Checked - Job Started",
"Invalid logical unit ID", "Invalid target port ID",
3PAR_TPD.mof 215