HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

FC Initiator Ports Subprofile CIM Classes
Table 82 FC Initiator Ports Subprofile CIM Classes
DescriptionClass
The storage array on which the initiator ports reside.TPD_StorageSystem
A SCSI transport endpoint. In this context, this represents
an initiator port on the HP 3PAR Storage System.
TPD_SCSIProtocolFCEndpoint
A Fibre Channel Port residing on the
TPD_StorageSystem.
TPD_FCPort
Supported Methods
Table 80 (page 95) describes the supported methods of the FIbre Channel initiator ports subprofile:
Table 83 Methods for TPD_StorageSystem
DescriptionMethod
Provides the ability to set owner and contact information
for the StorageSystem.
modifyInstance()
iSCSI Target Ports Subprofile
The iSCSI Target Ports subprofile models iSCSI specific aspects of a target storage system. This
subprofile provides information about FC ports on a storage system that are connected to hosts or
FC switches.
The Multiple Computer System subprofile models the underlying systems or controllers that cooperate
to present a single, top-level system (cluster) which provides for added redundancy or increased
functionality.
For detailed information regarding the FC Target Ports subprofile, refer to SMI-S at http://
www.snia.org.
The CIM Server supports the Multiple Computer System subprofile as defined in SMI-S v1.1.0. This
subprofile provides information about the controller nodes that comprise the storage system cluster.
The cluster is modeled as multiple tiers with each tier representing a pair of controller nodes.
iSCSI Target Ports Subprofile CIM Classes
Table 84 iSCSI Target Ports Subprofile Key CIM Classes
DescriptionClass
The storage array on which the target ports reside.TPD_StorageSystem
An iSCSI transport endpoint. Represents an iSCSI port.TPD_iSCSIProtocolEndpoint
An Ethernet Port residing on the TPD_StorageSystem.TPD_EthernetPort
Represents the SCSI view of ports as seen by SCSI initiators.TPD_SCSIController
Provides information about the iSCSI capabilities of an HP
3PAR Storage System.
TPD_iSCSICapabilities
Provides information about iSCSI Sessions, which are
established between an initiator port and a target port.
TPD_iSCSISession
Provides information about session-wide operational
properties, which are used during negotiation when
creating new iSCSI Sessions.
TPD_iSCSISessionSettings
iSCSI Target Ports Subprofile 95