HP 3PAR OS 3.1.2 MU2 Patch 19 Upgrade Instructions

3 Verify that the Service Processor Meets Requirements
The Service Processor (SP) must be at release level SP-4.1.0.GA-97 before you install this patch.
Check the SP Release Level
1. Establish a connection to the Service Processor.
2. From the SPMAINT main menu, enter: =1.1 (Display SP Version).
3. Verify that the SP Version entry displays SP-4.1.0.GA-97.
1.1 Display SP Version
SP Software Version
SP-4.1.0.GA-97
SP Base Image Version: Red Hat Enterprise Linux Server release 6.1
(Santiago)
SP Version: 4.1.0.GA-97
SP Patches:
InFormOS release (3.1.2): 3.1.2.278
InFormOS patches (3.1.2): 01
More detail is available in the latest SPLOR or spconfig data.
4. From the SPMAINT main menu, enter: =1.13 (Display SP Status).
5. Confirm that the following basic processes are running. Save the SP status output. You will
require this output to compare it with the post upgrade SP status after you install the patch.
Table 1 Example of Basic SP Processes
The following global procedures are running:
/sp/prod/code/csst/bin/SPcommctlr
/sp/prod/code/csst/bin/SPnetmon
/sp/prod/code/csst/bin/SPtransfer
/sp/prod/code/csst/bin/STlogger
/sp/prod/code/csst/bin/spcollect
/sp/prod/code/csst/bin/spevent
/sp/prod/code/csst/bin/stAnalyze
/sp/prod/code/csst/bin/stBackDoor
/sp/prod/code/csst/bin/stGrpNot
/sp/prod/code/csst/bin/stMonitor
/sp/prod/code/csst/bin/stNotify
There are 13 httpd server processes running
spevent is running for the following clusters:
1699799 (s799)
spcollect processes are running as follows:
biosmsg for 1699799 (s799)
config for 1699799 (s799)
eeprom for 1699799 (s799)
environ for 1699799 (s799)
evtlog for 1699799 (s799)
perfdb for 1699799 (s799)
perform for 1699799 (s799)
status for 1699799 (s799)
SSAgent run status -
6 Verify that the Service Processor Meets Requirements