HP 3PAR HP-UX Implementation Guide

--- Physical volumes --
PV Name /dev/dsk/c120d1
PV Name /dev/dsk/c14t0d1 Alternate Link
PV Status available
Total PE 2559
Free PE 0
Autoswitch On
NOTE: See the documentation at the: HP Support Center for complete information on using
the PVLinks feature to manage device paths.
NOTE: LVM and VxVM may coexist on the same system but should not be used to manage
the same devices.
NOTE: Remember to create raw and block device paths for the exported VLUNs using the
HP-UX ioscan and insf commands before executing any LVM and VxVM commands for
the new devices.
NOTE: The driver for AB379B and AD194A is fcd. The driver for AD299A or AD355A is
fclp. Replace fcd to fclp if you are using the AD299A or AD355A driver in the following
examples. The example below is for the AD194A HBA.
2. The fcmsutil utility can be used to display important information about each HBA port using
the port's /dev/fcd<instance> device node. The fcd instance number is shown in the
output of the ioscan -fun command.
# ioscan -fun
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
fc 2 2/0/11/1/0/4/0 fcd CLAIMED INTERFACE HP AD194-60001 PCI/PCI-X Fibre Channel 2-port 4Gb
FC/2-port 1000B-T Combo Adapter (FC Port 1)
34 Allocating Storage for Access by the HP-UX Host