HP 3PAR HP-UX Implementation Guide

The following screen shows that the HP 3PAR StoreServ Storage is selected as the root disk.
/opt/ignite/bin/itool () +
¦ ¦
¦ +-------++----------++--------++-------------++----------+ ¦
¦ ¦ Basic ¦¦ Software ¦¦ System ¦¦ File System ¦¦ Advanced ¦ ¦
¦ ¦ \-------------------------------------------------------------------+¦
¦ ¦ ¦¦
¦ ¦ Configurations: [ HP-UX B.11.31 Default ->] [ Description... ] ¦¦
¦ ¦ ¦¦
¦ ¦ Environments: [ HP-UX Data Center Operatin ->] (HP-UX B.11.31) ¦¦
¦ ¦ ¦¦
¦ ¦ [ Root Disk ] 3PARdataVV, 1/0/6/1/0.0x21410002ac0000b4> ¦¦
¦ ¦ ¦¦
¦ ¦ File System: [ Logical Volume Manager (LVM) with VxFS ->] ¦¦
¦ ¦ ¦¦
¦ ¦ [ Root Swap (MB)... ] 2048 Physical Memory (RAM) = 2040 MB ¦¦
¦ ¦ ¦¦
¦ ¦ [ Languages... ] English [ Keyboards... ] [ Additional... ] ¦¦
¦ ¦ ¦¦
¦ +---------------------------------------------------------------------------+¦
¦ [ Show Summary... ] [ Reset Configuration ] ¦
¦------------------------------------------------------------------------------¦
¦ [ Go! ] [ Cancel ] [ Help ] ¦
+------------------------------------------------------------------------------+
4. The installation process will start to install files to the boot volume and set it to be the primary
boot path. HP recommends that you have a high-availability, redundant boot path.
42 Booting the Host from the HP 3PAR StoreServ Storage