HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

2. Check the current iSCSI port settings: issue showport -iscsi. The following example shows
ports offline and unconfigured.
3. Issue controliscsiport addr to set the IP addresses and netmask addresses of the iSCSI
target ports; for example:
# controliscsiport addr 10.101.1.31 255.255.0.0 -f 0:3:1
# controliscsiport addr 10.101.1.131 255.255.0.0 -f 1:3:1
4. Verify the configuration; the following example shows two ports ready:
5. Issue createhost -iscsi [options] <hostname> [<iscsi_name>...].
Here is an example of a Windows 2008 R2 createhost command:
Configuring the HP 3PAR StoreServ Storage for iSCSI 33