HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

3. To add iSNS to the iSCSI initiator, follow these steps:
1. Click Start→Administrative Tools→iSCSI Initiator.
2. From the iSCSI Initiator Properties, select the Discovery tab, click the Add Server in iSNS
Servers section, and enter iSNS-Server or iSNS-IP in the popup window's Add iSNS Server
setting.
Establishing a Connection with the iSCSI Initiator Software
This section explains procedures for configuring Microsoft iSCSI Initiator software to establish a
connection. All of the steps after step 1 are the same for both Windows Server 2012 and Windows
Server 2008. Follow these steps:
1. To start iSCSI Initiator in Windows Server 2012, click Start→Programs→Administrative
Tools→iSCSI Initiator, as shown in “Starting the Windows Server 2012 iSCSI Initiator”
(page 36).
Figure 6 Starting the Windows Server 2012 iSCSI Initiator
To start iSCSI Initiator in Windows Server 2008, click Start→Programs→Administrative
Tools→iSCSI Initiator, as shown in “Starting the Windows Server 2008 iSCSI Initiator”
(page 37).
36 Setting Up a Windows Server 2012 or 2008/HP 3PAR StoreServ Storage Configuration with iSCSI Storage