HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

Figure 10 Configuring a Target Portal Connection
In the Connect using section of this dialog box, do the following:
• In the Local Adapter text field, select Microsoft iSCSI Initiator.
• In the Initiator IP: text field, select the IP address of the NIC adapter or CNA that you
want to use to connect to the iSCSI target.
The CRC/Checksum is not required.
For more information about setting the CHAP login, see “Configuring Host and Target CHAP”
(page 44).
5. Click OK in the Advanced Settings dialog box and again in the Discover Target Portal dialog
box. The Discovery tab in the iSCSI Initiator Properties window displays the port information,
as shown in “Target Portal Discovery” (page 41).
40 Setting Up a Windows Server 2012 or 2008/HP 3PAR StoreServ Storage Configuration with iSCSI Storage