HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

1. Issue showhost -chap to show that no CHAP secret is already set up.
# showhost -chap
Id Name -Initiator_CHAP_Name- -Target_CHAP_Name-
2. To set a CHAP secret for a target, issue sethost targetchap -chapname
<chapname>where <chapname> is the secret. For example:
# sethost targetchap -f target_secret0 sqa-dl380g5-08
3. To check results, issue showhost -chap; for example:
# showhost -chap
Id Name -Initiator_CHAP_Name- -Target_CHAP_Name
0 sqa-dl380g5-08 s055
4. In the iSCSI Initiator Properties window, click the Configuration tab. Click CHAP and enter the
Initiator CHAP secret, then click OK, as shown in “Setting Up Host CHAP for HP 3PAR StoreServ
Storage targetchap” (page 47).
NOTE: Enter target_secret0, from the example in step 2, at the Initiator CHAP secret
field. See “Setting Up Host CHAP for HP 3PAR StoreServ Storage targetchap” (page 47).
Figure 16 Setting Up Host CHAP for HP 3PAR StoreServ Storage targetchap
Configuring Host and Target CHAP 47