HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

Procedure 1 Using system BIOS to configure FCoE
1. Enter the setup menu. The combination of keys to press to enter setup may be different
depending on the host being configured. The example below is for an HP ProLiant:
Figure 24 Setup menu for Configuring FCoE
2. In the System Options pane, select NIC Personality Options.
Figure 25 NIC Personality Options
3. In the PCI Slot 2 Pane, select FCoE for both Port 1 and Port 2.
Configuring the FCoE Switch 59